 |
| 24" sliders |
 |
|
This slide out serves two functions: 1 trash storage and 2
easy access to the water pump and manual levers for the water distribution
system
|
 |
|
I have more then enough room to access the manual levers for
the water distribution system. If more space is needed you can remove the draw
easily
|
 | |||||||
| Kitchen counter top. |
 |
|
Reinforced top with 1x1 framing boards for stove
|
 |
|
Ready for laminate…
|
 |
|
Aluminum edge turned out really nice
|
 |
|
I had the intention to build a scaffold from scratch but I realized that it wouldn’t be worth the work. My original thought was building it myself would save money but it really wouldn’t. I would have spent around 60-80 bucks at Home Depot in lumber with no value in the end, just wasted materials. Purchasing a scaffolding unit would not only be faster, safer, easier to setup and adjustable but it would be something I could sale after I was done with it. I picked this one up off CL for about 150 and should have no problem selling it again for the same price. |
 |
|
Before
Buffing is tedious but the reward in the end is
amazing! Here is an example of what Nuvite polish can do. Notice the amount of damage
in the before picture. Heavy scratches, heavy pitting and multiple dents.
Nuvite F7 is capable of removing scratches and dents become less noticeable. I tried multiple brands of polish and stand behind Nuvite 100%. It's
amazing how effective nuvite is. I know the price is high (1lb for 50 bucks) but a little goes a long
way.
|
 |
| After |
 |
|
Before
This part of the airstreams had the most damage. But with
about 3-4 hours of work it comes back to life
|
 |
| After. All the lines you see are caused by the circular buffer. Those will be removed latter when the Cyclo buffer is used. |
 |
| Before |
 |
| after First I used aircraft stripper to remove the clear coat. I picked some up at auto zone and purchased some brushes to apply. Use heavy duty rubber gloves to protect yourself when you brush it on. After it bubbles up spray it off (I used a pressure washer). Once the clear coat is removed it’s ready for buffing. I used a 7” buffing pad on a rotary polisher with Nuvite F7 polishing compound. I tried multiple compounds and stand by Nuvite 100%. Nuvite is a little $$ but a little goes a long way and personally I believe it to be at least 3x as affective then other brands on the market. Next you’ll need a Cyclo orbital polisher. It’s the only way to remove the swirl marks left by the 7” buffing pad. I purchased mine used on craiglist. To clean the black residue left behind by the polishing compound add 2 ounce (+or-) of vinegar in a spray bottle mixed with water. Spray the area and use a microfiber towel. For tough spots use terry cloth but be carful because terry cloth will leave scratches. The best way I found to remove residue is to cover the Cyclo buffer with the microfiber cloth. It works really well and is quicker than doing it by hand. Here is a list of what I used:
Buffing pad: Presta Double or single sisded BLACK wool cutting pad
http://www.amazon.com/PRESTA-Single-Sided-Cutting-Buffing/dp/B0082LFSPG
Buffing pad attachment: Quick connect adapter
http://www.autodetailingwarehouse.com/dewalt-polisher-makita-polisher-drive-adapter-DP1900.html
7in Sander/Polisher
http://www.homedepot.com/p/Makita-7-in-Sander-Polisher-9227C/100594840
Cyclo buffer:
http://www.eastwood.com/cyclo-model-5-dual-headed-polisher.html?srccode=ga220010&gclid=CMWBrfz24L0CFS1eOgodX3oAyw
Nuvite polish: F7 cut and finish with S
http://www.aircraftspruce.com/pages/cs/cleaners_znuvite/nuvitenushine.php
Terry cloth and Microfiber cloth
|
