Bedroom Overheads started.

Started the overhead storage for the bedrooms this weekend. I ran out of time and wasn't able to install them yet but hope to finish it up during the week.

Using a dado table saw setup i was able to cut 1/4 slots that will hold the sliding doors. Simply make the top deeper then the bottom and you're good to go. 

I started with one template that Nikki created. Then i simple used a router to make duplicates 

Adding the supports. The 1/2 inch notches are there to help the wood sheet hold its curve after its applied 

Instead of build two long units, I built 4 sections to make it easier to apply the wood  (its a pain to bend wood in large sections). When they are complete I will attach them together to make two full units. 

Heres whats been going on the past few weeks

Hello everyone! I wanted to post some updates on the Airstream. normally i would post completed projects but I've really been jumping around from one project to the next. So far i have started the wall dividers  with the pocket doors, pantry, bed area, draws that go under the bed and the design of the entertainment center (Nikki did a great job designing the entertainment center). I will post all the projects from start to finish later. But here are some progress pics!

Entertainment Center

Entertainment center design

Add caption

A place to put remotes or odd stuff. 

Pantry

Beds

Starting the beds

bed frame

Both beds will be adjustable air mattresses (Almost like a sleep number)

I want heat going to the front, middle and rear of the airstream. So we added this vent that i fabricated in the bedroom.

Vent complete

Pocket doors 

Foam core walls. This provides insulation and sound dampening.

Pantry Design.

Nikki designed the pantry which I will start this coming weekend. It will be a challenge but the end result will be awesome!  And don't worry about updates on the progress of the airstream the past few weeks. I have plenty of work to share I just need to get some good shots of what's been done. So far I have started the pantry, built the beds with pull out drawers, built wall dividers with POCKET DOORS and installed heating into the bedroom. I will have all the pics posted in a few days :)